10 WAYS TO WINTERIZE YOUR HOME

You’ll get a season’s worth of savings and peace of mind by taking a few steps in the fall to get your home ready for cold weather.
So you’ve pulled your sweaters out of mothballs and found your mittens at the bottom of the coat closet. But what about your house — is it prepared for the cold months ahead?
1. Clean those gutters
Once the leaves fall, remove them and other debris from your home’s gutters — by hand, by scraper or spatula, and finally by a good hose rinse — so that winter’s rain and melting snow can drain. Clogged drains can form ice dams, in which water backs up, freezes and causes water to seep into the house, the Insurance Information Institute says.
As you’re hosing out your gutters, look for leaks and misaligned pipes. Also, make sure the downspouts are carrying water away from the house’s foundation, where it could cause flooding or other water damage.
2. Block those leaks
One of the best ways to winterize your home is to simply block obvious leaks around your house, both inside and out, experts say.
First, find the leaks: On a breezy day, walk around inside holding a lit incense stick to the most common drafty areas: recessed lighting, window and door frames, electrical outlets.
Then, buy door sweeps to close spaces under exterior doors, and caulk or apply tacky rope caulk to those drafty spots.
Outside, seal leaks with weather-resistant caulk. For brick areas, use masonry sealer, which will better stand up to freezing and thawing. “Even if it’s a small crack, it’s worth sealing up.
3. Insulate yourself
“Another thing that does cost a little money — but boy, you do get the money back quick — is adding insulation to the existing insulation in the attic, Regardless of the climate conditions you live in, in the (U.S.) you need a minimum of 12 inches of insulation in your attic.”
Don’t clutter your brain with R-values or measuring tape. Rule of thumb on whether you need to add insulation, if you go into the attic and you can see the ceiling joists you know you don’t have enough, because a ceiling joist is at most 10 or 11 inches.
A related tip: If you’re layering insulation atop other insulation, don’t use the kind that has “kraft face” finish (i.e., a paper backing). It acts as a vapor barrier, and therefore can cause moisture problems in the insulation.
4. Check the furnace
First, turn your furnace on now, to make sure it’s even working, before the coldest weather descends. A strong, odd, short-lasting smell is natural when firing up the furnace in the autumn; simply open windows to dissipate it. But if the smell lasts a long time, shut down the furnace and call a professional.
It’s a good idea to have furnaces cleaned and tuned annually
Throughout the winter you should change the furnace filters regularly (check them monthly). A dirty filter impedes air flow, reduces efficiency and could even cause a fire in an extreme case. Toss out the dirty fiberglass filters; reusable electrostatic or electronic filters can be washed.
5. Get your ducts in a row
According to the U.S. Department of Energy, a home with central heating can lose up to 60% of its heated air before that air reaches the vents if ductwork is not well-connected and insulated, or if it must travel through unheated spaces. That’s a huge amount of wasted money, not to mention a chilly house.
Ducts aren’t always easy to see, but you can often find them exposed in the attic, the basement and crawlspaces. Repair places where pipes are pinched, which impedes flow of heated air to the house, and fix gaps with a metal-backed tape (duct tape actually doesn’t stand up to the job over time).
Ducts also should be vacuumed once every few years, to clean out the abundant dust, animal hair and other gunk that can gather in them and cause respiratory problems.
6. Face your windows
Now, of course, is the time to take down the window screens and put up storm windows, which provide an extra layer of protection and warmth for the home. Storm windows are particularly helpful if you have old, single-pane glass windows. But if you don’t have storm windows, and your windows are leaky or drafty, they need to be updated to a more efficient window.
Of course, windows are pricey. You can purchase a kit that has plastic sheeting that’s affixed to a window’s interior with double-stick tape. A hair dryer is then used to shrink-wrap the sheeting onto the window. (It can be removed in the spring.) “It’s temporary and it’s not pretty, but it’s inexpensive (about $4 a window) and it’s extremely effective.
7. Don’t forget the chimney
Ideally, spring is the time to think about your chimney, don’t put off your chimney needs before using your fireplace, Eldridge advises. A common myth is that a chimney needs to be swept every year. Not true. A chimney should at least be inspected before use each year.
One other reminder: To keep out cold air, fireplace owners should keep their chimney’s damper closed when the fireplace isn’t in use. And for the same reason, woodstove owners should have glass doors on their stoves, and keep them closed when the stove isn’t in use.
8. Reverse that fan
Reversing your ceiling fan is a small tip that people don’t often think of. By reversing its direction from the summer operation, the fan will push warm air downward and force it to recirculate, keeping you more comfortable. (Here’s how you know the fan is ready for winter: As you look up, the blades should be turning clockwise.)
9. Wrap those pipes
A burst pipe caused by a winter freeze is a nightmare. Prevent it before Jack Frost sets his grip: Before freezing nights hit, make certain that the water to your hose bibs is shut off inside your house (via a turnoff valve), and that the lines are drained.
Next, go looking for other pipes that aren’t insulated, or that pass through unheated spaces — pipes that run through crawlspaces, basements or garages. Wrap them with pre-molded foam rubber sleeves or fiberglass insulation, available at hardware stores. If you’re really worried about a pipe freezing, you can first wrap it with heating tape, which is basically an electrical cord that emits heat.
10. Finally, check those alarms
This is a great time to check the operation — and change the batteries — on your home’s smoke detectors. Detectors should be replaced every 10 years, fire officials say. Test them — older ones in particular — with a small bit of actual smoke, and not just by pressing the “test” button. Check to see that your fire extinguisher is still where it should be, and still works.

10-Point Checklist For Fall Furnace Maintenance

As heating season approaches the Indianapolis area, it’s time to get out your fall maintenance checklist. High on your list should be a comprehensive furnace tune up. Annual furnace maintenance by a qualified HVAC professional will save you money on energy costs and extend the life of your system, as well as help keep you warmer and your family safer this heating season. Here are 10 important maintenance tasks your HVAC professional will perform:
• Check and tighten electrical and gas connections to ensure your system operates safely.
• Check operational pressures.
• Clean condenser coils.
• Measure the current and voltage on the motor.
• Check safety switches.
• Clean and lubricate all moving parts to reduce friction.
• Check your thermostat for accuracy and proper operation.
• Check and clean blower assembly.
• Clean condensate drain lines.
• Check and replace the air filter.
In addition to a professional tune up, there are some things you can do this winter to help keep your system running smoothly and safely:
• Stock up on furnace filters and change your filter monthly to ensure proper airflow and extend the life of your furnace.
• Keep the area around your furnace clean and accessible in case of an emergency.
• Change the batteries in your smoke and carbon monoxide detectors, and test them to make sure they’re working properly.
• Keep the emergency number of your gas company posted on your furnace and call immediately if you smell gas around your unit.
• Know where your emergency gas shutoff valve is, and make sure it’s easily accessible.
Taking steps to maintain your furnace will help prevent carbon monoxide leaks, prevent breakdowns and save you the cost of replacing the unit.
maxresdefault